FW26
PRE-ORDER
Featured Products
Take advantage of this opportunity to place your FW26 order early and receive your pieces before the drop!
The HMW Second Model Jacket is built to a waist-length cut with just enough room in the body to move freely and enough structure to hold its shape across years of use. It takes the Type 2 trucker silhouette as its starting point and constructs it entirely from Italian suede, a material that forms, creases, and develops a patina specific to the person wearing it.
Two large patch pockets sit on the chest with button flap closures. Beneath them, a second set of hand-warming pockets open from the side, set into the body where they stay accessible without adding bulk to the front.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Italian Jail Jacket is built with set-in sleeves that follow the shoulder line with accuracy, producing a clean drape that does not pull or pucker through movement. Taking its proportions from vintage Italian prison workwear, cut without sentiment and constructed to perform, and building it with the precision that silhouette always deserved. The sleeve cap is shaped to hold its form so the jacket rests naturally at rest and in motion. Inside, a curved facing reinforces the opening, a detail drawn directly from vintage tailoring. Every seam throughout is double-needle flat-felled.
Two patch pockets at the waist and one on the left chest are placed where they are actually used. Constructed entirely from Italian suede that will age to the exact shape of the person wearing it.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Military Half Coat Type-B is cut to a mid-length silhouette that hits at the top of the thigh, generous through the body with a military cut that moves without restriction. Built on the foundation of a 1960s Canadian Army field jacket and pushed into something that stands entirely on its own. Three fireman hooks run the front closure in high quality hardware, each one built to engage fast and hold firmly. A vertical zip pocket on the left chest sits flush against the body. The waist cinches to shape when you want it.
A corduroy collar finishes the top block with material contrast that will outlast the rest of the construction. Available in three fabrics: 100% wool Black, 100% wool Damask or our custom deadstock Jacquard Cotton Green Camo that was woven in the USA and not available anywhere else.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
Czech military design has never been refined quite like this. The Migi Czech Coat takes the long, oversized silhouette of the vintage Eastern European military overcoat and rebuilds it in deadstock 100% cotton ripstop. The fabric carries real weight and structure without bulk, the kind of density that only comes from material that was never meant to be decorative.
We engineered the exterior with an asymmetrical vertical zipper in contrasting olive hardware and tape, positioned off-center on the chest for a closure that is as functional as it is distinctive. A full button front sits behind it, giving you two ways to seal out the weather. The cinchable waist lets you shape the fit or leave the long body to hang generously, built to layer over a heavy coat or carry the day on its own. The structured, oversized hood draws down close when it needs to. The deep flap pockets are placed to be used.
This is a USA-made piece cut from deadstock fabric that will not be remade. We may not bring the Migi Czech Coat into the full FW26 lineup, which makes what is available now the window to claim it. If you have been waiting for the right coat to outlast a decade of seasons, this is it.
The Music Tour Jacket is built with a fitted bomber silhouette, button front closure, knit collar, and knit cuffs that hold the waist-length cut clean at both ends. Referencing the era of vintage concert tour jackets that were constructed with as much intention as the music they represented. Two large diagonal two-way zip pockets open across the front at the hip, positioned for actual use and built to stay secure. Hair-on leather panels run the full length of both arms from shoulder to cuff, a construction decision that defines the jacket as much as any seam.
The wool body and the leather arms will each age on their own terms and together build a surface that only gets better with time.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Uraji Jute Coat is cut long and generous, designed to go over everything you are already wearing while holding its own shape throughout. Rooted in classic elegant menswear, it carries that tradition through black fireman hook closures running the front, a hardware choice drawn from industrial workwear that closes with conviction and wears without loosening over time.
Suede trims the collar, pocket flaps, and cuffs at every point where the coat meets the body. These are the points of contact that develop patina first, soften and shape to the wearer fastest, and tell the story of how long and how well this coat has been used.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Leather CWP Blouson is built to the waist-length bomber silhouette of the CWU-45P, one of the most resolved flight jacket cuts ever produced, and constructs it entirely from Japanese suede in collaboration with Backlash. Two large patch pockets sit at the waist, deep and structured, placed to be used rather than implied. The full zip closure runs center front with a pull that moves cleanly through the full length of the jacket.
Knit cuffs and a knit hem finish both ends of the silhouette, holding the waist-length cut in place and keeping the fit close without restricting movement. The Japanese suede body will crease, soften, and develop a surface character over time that no new jacket can replicate.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Fireman Jacket closes with a front flap over fireman hooks, covering the hardware and sealing the chest in one clean line. Drawn from the construction logic of vintage fireman jackets, every detail is placed to perform. The collar and cuffs are finished in suede, the points that take the most contact and age the best. An adjustable tab at the wrist dials the fit close when it needs to be.
The silhouette hits right at the waist with a generous, roomy cut through the arms built for movement over a heavy layer. Made from deadstock military surplus cotton ripstop in black that will not be restocked once it is gone.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Santa Monica Pullover is built to the proportions of a vintage mock neck sweater, hitting right at the waist with a relaxed body constructed for daily use. A convertible neck snaps closed into a finished collar or opens down the chest. The same snap system at the waist allows the front to open like a jacket or close for warmth, giving the piece two distinct ways to wear depending on the day.
Constructed from Italian suede that drapes with weight, creases with wear, and softens to the body in a way that takes time and rewards patience.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The CWE Blouson is built to a waist-length bomber structure with two large patch pockets at the waist, placed and sized to be used. Referencing the resolved proportions of the CWU-45P flight jacket and carrying that logic into Italian suede, a material that earns its look over time rather than arriving finished. Elastic cuffs and hem finish the jacket at both ends, a construction detail drawn from 1980s ski outerwear that keeps the silhouette clean and the fit comfortable without bulk.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The CWE Blouson is built to the waist-length bomber silhouette of the CWU-45P and constructed in collaboration with Epperson, whose webbing and daisy chain work defines the jacket as much as any seam. Two slanted chest pockets and two large patch pockets at the waist each carry daisy chain loops built for actual attachment and use. On the back, an X-shaped daisy chain harness runs shoulder to waist, crossing at the center and terminating at four anchor points. It is a construction detail that is fully functional and completely distinctive.
Elastic cuffs and hem finish both ends of the silhouette, a detail drawn from 1980s ski outerwear that keeps the fit comfortable and the waist-length cut locked in place. The wool body is woven in Mexico and carries the weight the silhouette requires.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.
The Daron Jacket is built to a classic hunting jacket silhouette, hitting right at the waist with a generous, comfortable body that wears easily over layers. A collaboration with Japanese leather specialists Backlash, constructed with two large patch pockets at the waist and two cargo patch pockets on the chest, all sitting beneath a full button front closure finished with leather buttons. The pockets are placed and sized to be used, not to decorate the front.
Suede panels contrast against the leather body at the lower pockets and cuffs, grounding the piece in material detail that reads immediately. The shearling collar sits with real volume at the top of the jacket, removable and substantial, built to be worn up in serious cold or open when the temperature allows.
Made in the USA and available to order now ahead of the full FW26 collection. We may not bring it into the collection, secure yours now with the FW26 Pre-order.